My Visitors
Subscribe Here
Posts
Comments
Sunday, February 13, 2011
Wow I finally wrote a new Tut!
I know my blog is in sad need of an update! It has been awhile since I got a chance to write a new tut! I decided to use the beautiful PTU kit Honestly by Kara at Sweet Cravings Scraps! Here is the preview and the tutorial to follow!
Tube: The Fabulous Art work by Keith Garvey HERE
You must have a license to use his work(mine was purchased at MPT he now sells at the link provided)
Template by Crys at Creative Scraps by Crys HERE
Mask: Vix mask 355 HERE
Plug-ins:
Eye candy 5 Impact (optional) : Gradient glow & Glass (can also substiture Eye candy 4000)
Xero: Radiance (optional)
Font Used: FTU font Satisfaction & Segoe
♥ Let's Get started! ♥
Open the template in psp, delete all the hearts. Image, canvas size 600x600
For the drop shadow on evertying I am using the following settings:
Verticle: 2, Horizontal: 2, Opacity: 70, Blur: 6, color black. (you use what ever you want)
Remember to save as you go.
(*Resize everything before you start copy and pasting)
Paper 1 (resize 75%)
Paper 6 (resize 50%)
Paper 12 (resize 75%)
Paper 20 (resize 50%)
Tube: (if using the same as I am) resize 82% Close up resize 82%
Bow 4 (resize 36%)
Butterfly mask 2 (resize 36%)
candles 3 (resize 22%)
Flare 2 (resize 74%)
flower 1 (resize 40%)
Pears (resize 12%)
Ribbon puff 6 (resize 36%)
Close up tube: Blend to Soft Light (Effects, plugins, xero,
radiance on these settins: Strangeness 128, Charm 50, Truth 128, Beauty 255)
You can always refer to the sample for placement of anything!
copy and paste paper 1 below the last layer on the template. Layers, load mask from disk, choose your mask click ok.
Merge group.
Copy and paste flower, move to lower left corner. Duplicate and move to upper right corner. Duplicate again. On bottom layer adjust, blur, gaussian blur raius on 13. click ok. Do the same on the lower left hand flower copy and paste your ribbon puff adjust to your liking. Duplicate and adjust on the right side. See example. on the black strip, effects, texture effects, weave with this settings: Gap size 5 weave color black. Width 12 Gap color white, Opacity 28, check fill gaps.
select the long white rectangle. Selections, float, defloat, invert paste paper 12, hit delete. Delete the botton rectangle Select the white square selections, float, defloat, invert, paste paper 12 hit delete. paste close up tube, hit delete. If you choose you can now add the gradient glow with these setting:
Glow Type: mark outside glow
mask Selection marked
Glow radius: 5
Soften Corners: 25
Opacity: 100
Distortion Amount 0 Distortion Lumpsize:55
Gradient Smoothness: 100
color is black.
Delete white square.
Select the left square, selections, select all, float defloat, invert. paste paper 6 hit delete. add your gradient glow if you select to do so. Use the same settings as above. Delete the gray square below.
Copy and paste flare 2. use sample for placement. paste bow 4 and adjust to lower corner of left square. select the right square, selections, select all, float, defloat, invert paste paper 20. hit delete. Add gradient glow if you choose with the above settings. Delete bottom layer. Paste
butterfly mask position over right square, use your pick tool and rotate to the right to match the square. Now copy and paste the candles and pears. copy and paste tube.
I hope you remembered to add your dropshadow to everything. If not, then now would be the perfect time to do so. For the word art (Optional) I used Segoe for the blocky wording. Bold and stroke width on 6. use color of your choice.
I used color # b98fb2 Type out the words you want, I used the name of the kit Heavenly all in caps. Now this step is optional Add glass effect with these setting:
Under Settings tab: Clear
Under Basic tab:
Bevel Width on 6.26 Bevel Smoothness on 0
Round selection corners 0
Inside selection checked
Opacity 0, Tinting 0, Refractions 50, Inner Shadow 22
Dropshadow 0, Shadow offest 10.80, Shadow glow 20
Then add a gradiant glow with the previous settings only using white instead of black. Add your dropshadow.
I used Satisfaction for the words Beautiful on bold.
Crop and resize to your liking. Now add your name and copyright
Make sure the DPI is at 72 and save! you are done! Simple and easy.
I would love to see what you made!
Thank you for following my tutorial! If you have any questions please email me at
kissnjoe@yahoo.com!
For this tutorial you will need the following:
Scrap kit: PTU kit Honestly by Kara at Sweet Cravings Scraps HERETube: The Fabulous Art work by Keith Garvey HERE
You must have a license to use his work(mine was purchased at MPT he now sells at the link provided)
Template by Crys at Creative Scraps by Crys HERE
Mask: Vix mask 355 HERE
Plug-ins:
Eye candy 5 Impact (optional) : Gradient glow & Glass (can also substiture Eye candy 4000)
Xero: Radiance (optional)
Font Used: FTU font Satisfaction & Segoe
♥ Let's Get started! ♥
Open the template in psp, delete all the hearts. Image, canvas size 600x600
For the drop shadow on evertying I am using the following settings:
Verticle: 2, Horizontal: 2, Opacity: 70, Blur: 6, color black. (you use what ever you want)
Remember to save as you go.
(*Resize everything before you start copy and pasting)
Paper 1 (resize 75%)
Paper 6 (resize 50%)
Paper 12 (resize 75%)
Paper 20 (resize 50%)
Tube: (if using the same as I am) resize 82% Close up resize 82%
Bow 4 (resize 36%)
Butterfly mask 2 (resize 36%)
candles 3 (resize 22%)
Flare 2 (resize 74%)
flower 1 (resize 40%)
Pears (resize 12%)
Ribbon puff 6 (resize 36%)
Close up tube: Blend to Soft Light (Effects, plugins, xero,
radiance on these settins: Strangeness 128, Charm 50, Truth 128, Beauty 255)
You can always refer to the sample for placement of anything!
copy and paste paper 1 below the last layer on the template. Layers, load mask from disk, choose your mask click ok.
Merge group.
Copy and paste flower, move to lower left corner. Duplicate and move to upper right corner. Duplicate again. On bottom layer adjust, blur, gaussian blur raius on 13. click ok. Do the same on the lower left hand flower copy and paste your ribbon puff adjust to your liking. Duplicate and adjust on the right side. See example. on the black strip, effects, texture effects, weave with this settings: Gap size 5 weave color black. Width 12 Gap color white, Opacity 28, check fill gaps.
select the long white rectangle. Selections, float, defloat, invert paste paper 12, hit delete. Delete the botton rectangle Select the white square selections, float, defloat, invert, paste paper 12 hit delete. paste close up tube, hit delete. If you choose you can now add the gradient glow with these setting:
Glow Type: mark outside glow
mask Selection marked
Glow radius: 5
Soften Corners: 25
Opacity: 100
Distortion Amount 0 Distortion Lumpsize:55
Gradient Smoothness: 100
color is black.
Delete white square.
Select the left square, selections, select all, float defloat, invert. paste paper 6 hit delete. add your gradient glow if you select to do so. Use the same settings as above. Delete the gray square below.
Copy and paste flare 2. use sample for placement. paste bow 4 and adjust to lower corner of left square. select the right square, selections, select all, float, defloat, invert paste paper 20. hit delete. Add gradient glow if you choose with the above settings. Delete bottom layer. Paste
butterfly mask position over right square, use your pick tool and rotate to the right to match the square. Now copy and paste the candles and pears. copy and paste tube.
I hope you remembered to add your dropshadow to everything. If not, then now would be the perfect time to do so. For the word art (Optional) I used Segoe for the blocky wording. Bold and stroke width on 6. use color of your choice.
I used color # b98fb2 Type out the words you want, I used the name of the kit Heavenly all in caps. Now this step is optional Add glass effect with these setting:
Under Settings tab: Clear
Under Basic tab:
Bevel Width on 6.26 Bevel Smoothness on 0
Round selection corners 0
Inside selection checked
Opacity 0, Tinting 0, Refractions 50, Inner Shadow 22
Dropshadow 0, Shadow offest 10.80, Shadow glow 20
Then add a gradiant glow with the previous settings only using white instead of black. Add your dropshadow.
I used Satisfaction for the words Beautiful on bold.
Crop and resize to your liking. Now add your name and copyright
Make sure the DPI is at 72 and save! you are done! Simple and easy.
I would love to see what you made!
Thank you for following my tutorial! If you have any questions please email me at
kissnjoe@yahoo.com!
Subscribe to:
Post Comments (Atom)
About Me
- Crys
- I am a SAHM of 2 very active kids and a Wife to a wonderful man. I also take care of my grandma who lives with us...so yep I am a busy girl...lol, I started out as a tagger almost 4 yrs ago and then I started making templates and writing tutorials, one day I decided I wanted to try my hand at making scrap kits...and almost 2 years later, I am still making them. I have met a lot of amazing people along the way that have helped and given me support through-out all of this. Big hugs and thanks! Well that is about it, if you want to know more...just shoot me an email!
My Scrap Blog
Snag My Blinkie
0 comments: