Welcome

My tutorials are all copyright compliant and created for those with a working knowledge of PSP. All tutorials are of my own creation and any resemblance to any other tutorial is purely coincidence. I strive to be 100% copyright compliant, so if you see something of yours on my blog that I haven't given credit for, please notify me immediately so I can give credit or take it down. Do not take my tutorials and claim them as your own or place them on another site. Direct people to my blog instead. I hope you enjoy my tutorials!
Powered by Blogger.

My Visitors

Monday, February 21, 2011

PTU tut Rocker Chic

For this tutorial you will need the following:


Scrap kit: PTU kit Rocker Chic by Sleek-N-Sassy Designz HERE
This kit is on Sale for 50% off right now.

Tube: The Fabulous Art work by Elias Chatzoudis HERE
You must have a license to use his work(mine was purchased at MPT he now sells at the link provided)

Mask: WSL mask 84 HERE

Plug-ins:
Eye candy 5 Impact (optional) : Gradient glow

Font Used: FTU font Pea Anna Banana

♥ Let's Get started! ♥

Open new image canvas size 600x600 DPI 72

For the drop shadow on evertying I am using the following settings:
Verticle: 2, Horizontal: 2, Opacity: 70, Blur: 6, color black. (you use what ever you want)
Remember to save as you go.

(*Resize everything before you start copy and pasting)
Paper 5 (resize 75%)
Paper 8 (resize 60%)
Bubbles (resize 60%)
Disco Ball (resize 74%)
Flower (resize 34%)
Frame 3 (resize 70% Free Rotate 45%)
Glitter (resize 40%)
Key Cheain 2 (resize 40%)
Lip Stick (resize 26%)
Music Notes (resize 54%)
Record (resize 44%)
Tube (resize 80%)

You can always refer to the sample for placement of anything!
copy and paste paper 5, layers, Load/save mask, load mask from disc choose the mask, merge group
Copy and paste the frame. With the magic wand, click inside the frame, selections, modify by 3, invert, copy and paste
paper 8 hit delete on the keyboard. Selection, select non, move below the frame. Add dropshadow. Now then copy and
paste the glitter, add dropshadow, position to the lower left side of frame behind the paper, duplicate and drag to the
top right side. copy and paste the record and flower, add drop shadows, position at the top left side under the paper layer
copy and paste the music notes arange to the side above the record, see sample for placement. Add dropshadow. copy and paste
the keychain, adust above the frame at the top left side, dropshadow, copy and paste the bubbles, if still a little to big,
with your pick tool, readust size. position above the frame to the bottom part of the frame, see sample. Copy and paste
the disco ball drag under the frame and erase the chain, position as seen in the sample. copy and paste the tube. Position
above the frame Duplicate the flower and drag abovethe tube. Duplicate again, Effects, Photo Effects, black and White film,
click ok. Duplicate again. Drag the pink flower to the top and move the 2 gray flowers around until the tube is covered
like in the sample. Readjust the pink one ontop of the gray ones. copy and paste the lipstick drag below the pink flower,
with the pick tool, rotate til it is slightly to the left. Add dropshadow. Now you want to resize. I resized mine to 500.
Add your name and if you are going to add a gradient glow to the name, then follow the next step of directions.
If you choose you can now add the
gradient glow with these setting:
Glow Type: mark outside glow
mask Selection marked
Glow radius: 5
Soften Corners: 25
Opacity: 100
Distortion Amount 0 Distortion Lumpsize:55
Gradient Smoothness: 100
color is white. I added another tab and added a pink color around the white.
You are almost done, now you need to add the copyright and any license numbers if need be. Crop and
make sure the DPI is at 72 and save! you are done! Simple and easy.
I would love to see what you made!
Thank you for following my tutorial! If you have any questions please email me at
kissnjoe@yahoo.com!
Sunday, February 13, 2011

Wow I finally wrote a new Tut!

I know my blog is in sad need of an update!  It has been awhile since I got a chance to write a new tut!  I decided to use the beautiful PTU kit Honestly by Kara at Sweet Cravings Scraps!  Here is the preview and the tutorial to follow!
For this tutorial you will need the following:
Scrap kit: PTU kit Honestly by Kara at Sweet Cravings Scraps HERE

Tube: The Fabulous Art work by Keith Garvey HERE

You must have a license to use his work(mine was purchased at MPT he now sells at the link provided)

Template by Crys at Creative Scraps by Crys HERE

Mask: Vix mask 355 HERE

Plug-ins:

Eye candy 5 Impact (optional) : Gradient glow & Glass (can also substiture Eye candy 4000)

Xero: Radiance (optional)

Font Used: FTU font Satisfaction & Segoe

♥ Let's Get started! ♥

Open the template in psp, delete all the hearts. Image, canvas size 600x600
For the drop shadow on evertying I am using the following settings:
Verticle: 2, Horizontal: 2, Opacity: 70, Blur: 6, color black. (you use what ever you want)
Remember to save as you go.
(*Resize everything before you start copy and pasting)
Paper 1 (resize 75%)
Paper 6 (resize 50%)
Paper 12 (resize 75%)
Paper 20 (resize 50%)
Tube: (if using the same as I am) resize 82% Close up resize 82%
Bow 4 (resize 36%)
Butterfly mask 2 (resize 36%)
candles 3 (resize 22%)
Flare 2 (resize 74%)
flower 1 (resize 40%)
Pears (resize 12%)
Ribbon puff 6 (resize 36%)

Close up tube: Blend to Soft Light (Effects, plugins, xero,
radiance on these settins: Strangeness 128, Charm 50, Truth 128, Beauty 255)

You can always refer to the sample for placement of anything!
copy and paste paper 1 below the last layer on the template. Layers, load mask from disk, choose your mask click ok.
Merge group.
Copy and paste flower, move to lower left corner. Duplicate and move to upper right corner. Duplicate again. On bottom layer adjust, blur, gaussian blur raius on 13. click ok. Do the same on the lower left hand flower copy and paste your ribbon puff adjust to your liking. Duplicate and adjust on the right side. See example. on the black strip, effects, texture effects, weave with this settings: Gap size 5 weave color black. Width 12 Gap color white, Opacity 28, check fill gaps.
select the long white rectangle. Selections, float, defloat, invert paste paper 12, hit delete. Delete the botton rectangle  Select the white square selections, float, defloat, invert, paste paper 12 hit delete. paste close up tube, hit delete.  If you choose you can now add the gradient glow with these setting:
Glow Type: mark outside glow
mask Selection marked
Glow radius: 5
Soften Corners: 25
Opacity: 100
Distortion Amount 0 Distortion Lumpsize:55
Gradient Smoothness: 100
color is black.
Delete white square.
Select the left square, selections, select all, float defloat, invert. paste paper 6 hit delete. add your gradient glow if you select to do so. Use the same settings as above. Delete the gray square below.
Copy and paste flare 2. use sample for placement.  paste bow 4 and adjust to lower corner of left square. select the right square, selections, select all, float, defloat, invert paste paper 20. hit delete. Add gradient glow if you choose with the above settings. Delete bottom layer. Paste
butterfly mask position over right square, use your pick tool and rotate to the right to match the square. Now copy and paste the candles and pears. copy and paste tube.
I hope you remembered to add your dropshadow to everything. If not, then now would be the perfect time to do so.  For the word art (Optional) I used Segoe for the blocky wording. Bold and stroke width on 6. use color of your choice.
I used color # b98fb2 Type out the words you want, I used the name of the kit Heavenly all in caps. Now this step is optional Add glass effect with these setting:
Under Settings tab: Clear
Under Basic tab:
Bevel Width on 6.26 Bevel Smoothness on 0
Round selection corners 0
Inside selection checked
Opacity 0, Tinting 0, Refractions 50, Inner Shadow 22
Dropshadow 0, Shadow offest 10.80, Shadow glow 20
Then add a gradiant glow with the previous settings only using white instead of black. Add your dropshadow.
I used Satisfaction for the words Beautiful on bold.
Crop and resize to your liking. Now add your name and copyright
Make sure the DPI is at 72 and save! you are done! Simple and easy.
I would love to see what you made!
Thank you for following my tutorial! If you have any questions please email me at
kissnjoe@yahoo.com!
.

About Me

My Photo
Crys
I am a SAHM of 2 very active kids and a Wife to a wonderful man. I also take care of my grandma who lives with us...so yep I am a busy girl...lol, I started out as a tagger almost 4 yrs ago and then I started making templates and writing tutorials, one day I decided I wanted to try my hand at making scrap kits...and almost 2 years later, I am still making them. I have met a lot of amazing people along the way that have helped and given me support through-out all of this. Big hugs and thanks! Well that is about it, if you want to know more...just shoot me an email!
View my complete profile

My Friends

My Scrap Blog

Photobucket

Snag My Blinkie

My Blinkie

Email Me

Send your results from my tutorials and I'll post them on my blog. I'd love to see what you make! Just send them to me at the link below and I'll get them posted. creativescrapsbycrys@yahoo.com